Service Hotline :086-570-7668578
Your present location:HomeNewsNewsIndustry News > Melt non-woven polypropylene spinning market present situation and development trend

Font Size:big  middle  small

Melt non-woven polypropylene spinning market present situation and development trend

Number of visits: Date:2013-9-18 17:19:40

The global demand of polypropylene melt spinning non-woven 2012 around 2.01 million tons, is expected to reach 2.4 million tons in 2016. Just look from the consumption of health industry, consumption in 2012 melt non-woven polypropylene spinning around 65 billion square meters, predicted in 2016 will increase to 80 billion square meters, if to tons as the calculating unit, during 2011 ~ 2016, non-woven polypropylene melt spinning is expected to increase rate of 4% a year, especially in emerging market growth rate is higher, expect China, Africa, South Asia, South America, Middle East and the asia-pacific region is the fastest growing area, will appear more moderate growth in Europe and North America; If as the calculating unit with square metre, annual growth rate of 5.6%, higher than in tonnage of numerical calculation, this is because the eisai field more and more use of light, heavy non-woven, non-woven tonnage in reducing the dosage of. Since middle and later periods of the 2008 global economic crisis, most of the market during 2009 ~ 2010 of spinning melt non-woven polypropylene to decrease in demand, but the opposite was true for eisai industry, its consumption has increased in the global scope, just like economic crisis does not exist. Eisai market this strong phenomenon is called "recession" resistance of non-woven fabrics industry, however, spinning melt non-woven fabrics in the field of eisai "evergreen" phenomenon is not persistent, starting from the second half of 2011, affected by the decline in the birth rate and usage is lower, eisai market began to slide, but before that, other markets has emerged the phenomenon of economic recovery. Although most of the global eisai market will rise trend in the future, but the speed will be slow. Since the great depression, America's birth rate has been in the lowest state, China and many countries in the asia-pacific region economy, although growing fast, but the situation is still lower than that before the recession. Spinning is the biggest application market melt non-woven hygiene materials, consumes about two-thirds of the global capacity (including coarse denier and fine denier spinning melt non-woven fabric) and other major markets and building materials, such as geotextile, housing and commercial bread wall cladding material, ground covering materials, household decoration, furniture and carpet backing, medical and industrial use protective clothing, cars, and other end USES, more and more applications are expected to use spinning melt non-woven fabric and its production technology. Globally, spinning melt non-woven will see continued growth in emerging markets, because has a higher market share, the growth in North America, Western Europe and other developed countries and regions will be very slow, to the rapid expansion of market penetration of eisai, developing countries will also be in a lower speed. In addition, the spinning melt non-woven fabric market share in other than eisai far below its potential, especially in developing countries and regions. Over the years, to meet the increasing market demand, spinning melt non-woven production capacity has been increased. The past few years, some influence factors lead to the rapid increase of new capacity: the first is the market more and more demand for low gram non-woven fabrics, the existing old equipment production this kind of product is not economic and reasonable, thus pushing global constantly invest in new online; Followed by compared with the existing model, melting technique is embodied in the latest generation of spinning nozzle number, working width larger, higher yield, production speed and extrusion fiber diameter smaller, lower energy consumption and a greater capacity, if we can make full use of the new technology of spinning melt, can greatly reduce the production cost, a new generation of flexible multi-purpose sex and characteristics of the technique of spinning melt attracted to manufacturers of different regions in the world and regional investment and use, thus adding new capacity; Third, in the emerging markets also appeared in recent years, strategic competition, some manufacturers in North America, China, Chile, Egypt and Russia and other countries invest, a new factory in India and Indonesia and high yield can run production line can be put into production in 2014, and there are some manufacturers the merger and reorganization between each other. Spinning melt non-woven fabric market pattern although appear larger changes, manufacturers have no ratinal coordinated with the original equipment, some of the old production line is still in high speed, but small profits. The speed of melt non-woven polypropylene spinning new in the world is growing by leaps and bounds, embodies the latest generation of spinning melt the characteristics of the technology of high speed, high yield and high efficiency, the concentrated investment phenomenon at the beginning of the economic crisis eisai market development situation is worth a good condition, but the present stage eisai industry as a whole, in the period of weak this is not suitable for the trend of rapid development. 2006 coarse denier and fine denier polypropylene spinning melt non-woven production capacity of about 2 million tons, during the period of 2006 ~ 2012, forecast capacity increase in the rate of about 5.3%, to 2012, about 2.8 million tons, it is important to note here, tonnage capacity is the nominal or design capacity, refers to the capacity of from slice to non-woven fabrics, including rated only downtime, if calculated according to square meter, 2012 health materials in the name of the production capacity is about 92 billion square meters. From September 2010 to September 2011, the global total of $28 on the new high capacity production line, the total design production capacity of 500000 tons of spinning melt non-woven fabric of one of the biggest production capacity production line, respectively, set up in China, the Middle East and north Africa (MENA), and some countries in the asia-pacific region, the production line running successively in 2016 and put into production, in addition, the rest of the world are not in the above statistics within the scope of the new online, such as India, Egypt and Indonesia, all for the modern production line of high capacity, the main purpose is to meet the growing health materials, the demand of the market. New capacity of the spinning melting equipment already consign is used for the global production capacity. From a global perspective, predict 2012 fine denier spinning melt non-woven capacity utilization of the supply/demand ratio less than 75% (in tonnage meter), if calculated according to square meters consumption, a lower rate. Predicts 2016, capacity utilization will be more than 75% (in tonnage meter), but according to square meter unit of value is less than 75%. Capacity utilization in different geographic regions in 2012 numerical is different also, this kind of phenomenon will be continued until 2017, and with the increase of the new online every year, the increase of production capacity, will cause the supply/demand ratio is below or above the average capacity utilization level of volatility. We hope we can all production run, a new on-line for full capacity can give full play to the advantages of the new technology, has the lowest manufacturing cost. A new generation of production equipment will also replace the existing in the production line running early equipment, may be the first will stop using the old equipment, data show that in 2012 23% of the fine denier spinning melt non-woven fabrics are produced by the original old equipment. Above for global spinning the present situation of the investment market, manufacturers in addition to focus on new installation and commissioning and reasonable use of old equipment at the same time, will also give full consideration to the round of the new capacity expansion brought about by the other impact factors, one is the increasing XinFang melting technology requires large investment, led to some manufacturers joint reorganization, each other to share the huge investment; The second factor is the efficiency of the technology, it is necessary to continue to increase investment to ensure that the technology, equipment and products in the market competitive power, as a result of production technology constantly updated, the manufacturers are having to constantly worry about the problem of outdated technology, and prompt them to continue to upgrade, repositioning, exit the market even wandering in the middle. In addition, it may appear as to the identity of the transformation, some new producers do import business, will be turned to the exporter. Although the impact of capacity increase, polypropylene spinning melt non-woven fabric production technology platform for a positive and healthy, continuously introduce new line to meet the growing market, production technology challenges as well as the changing of product requirements, the dynamic change means that melt non-woven polypropylene spinning need leading production technology and front facing fresh vibrant market. This article from the China industrial textiles industry association links:

Previous post:

Next post:High-profile filter material market

TypeInfo: Industry News

Keywords for the information: